IMPLEMENTATION PROPERTIES

• HARDENER
Molecular low-weight Prepolymere very penetrating and mineralising
Increases the cohesion of the tiles and blocks the flouring.

• HYDROFUGE CHAKING
Reduces the degree of absorption of water of the tiles and protects them from pollution, frost, slows down moss, algae and lichen formation.

• RENEWAL SYSTEM
In-depth colouring, non-film forming, guaranteeing a good behaviour of the hue in time and eliminates the risks of chipping, of separation.

TECHNIROC (Dry Weather)

Colours : red tiles, grey slate, dark red, brown dark, colourless

Charasteristics :
   - Density : 0198 ± 0,02
   - Viscosity à 20'C : 70 m. Pa.s
   - Flash active : sup. à 28'C
   - Matters drying : 35% ± 1
   - Effectiveness : sup. at 10 years
   - Drying : inf. 1 hours

   Implementation :
   Application by spraying AIRLESS on clean, dry or wet materials. The layers number and quantity of TECHNIROC are adapted for the surface to be satiny after drying.

   Performances :
   Behaviour with ULTRA-PURPLE according to method ASTM 653/84 higher than 1000 hours = 10 years (cf report /ratio of effectiveness of the scientific and technical center of construction - Report CSTC N° D E 622 X 438 - 322).

   The TECHNIROC must be used for outside applications. Supports covered with moss, lichen, algae will be cleaned at first.

TECHNIROC AQUA (Wet Weather)

Colours : red tiles, grey slate, brown dark, dark pink, colourless

Charasteristics :
   - Density : 1,1 ± 0,02
   - Viscosity at 201C (6 RPM) : 2500 m.Pa.s
                                   (60 RPM) : 600 m. Pa.s
   - Index of thixotropy : ±4
   - Not flash active : No solvent
   - Matters drying : 35% ± 1
   - Effectiveness : sup. at 10 years

   Implementation :
   Application by spraying AIRLESS on clean, dry or wet materials. The layers number and quantity of TECHNIROC are adapted for the surface to be satiny after drying.

   Precautions :
   THE TECHNIROC must be used for outside applications. Supports covered with mosses, lichens, algae will be cleaned at first.

   Performances :
   Behaviour with ULTRA-PURPLE according to method ASTM 653/84 higher than 1000 hours = 10 years (cf report /ratio of effectiveness of the scientific and technical center of construction - Report CSTC N° D E 622 X 438 - 322).